Custom police patch

Custom Police Patches

Police patches

Custom police patches for departments, sheriff’s offices, K9 units, SWAT teams and police associations. Shoulder patches, vest patches and morale patches, embroidered or PVC. Free proof, 50-piece minimum and free tracked shipping.

PriceFrom $0.75 per piece — full grid on patch pricing
Minimum order50 pieces
Production10–12 business days standard, 5–7 rush at no extra charge
ShippingFree and tracked worldwide, usually 3–7 business days in transit
ProofFree digital proof — nothing is made until you approve it
Payment50% deposit once the proof is approved, 50% before dispatch
Custom Police Patches at a glance

What we make for police customers

  • Department shoulder patches — the classic arched or shield shape, with the department name, seal and state
  • Vest and carrier patches — POLICE, SHERIFF and unit ID panels with hook backing for plate carriers and outer vests
  • Unit patches — K9, SWAT, traffic, marine, detective and dispatch units
  • Commemorative patches — anniversaries, memorials, National Police Week and charity designs
  • Morale patches — see custom morale patches
  • Association and union patches — lodges, associations and retiree groups

Shoulder patches

A shoulder patch is the patch that says which agency an officer belongs to. Most are 3 to 4.5 inches tall, embroidered on twill with a merrowed border, and sewn on. Fine text such as a city name or a motto needs enough size to stay readable. We will tell you on the proof if any lettering is too small to stitch cleanly.

If you are replacing an existing patch, send a clear photo of it next to a ruler. We redraw it and match the colours as closely as thread allows. Any difference is shown on the proof before production.

Vest and carrier patches

Vest patches go on the front and back of outer carriers. They are usually large, high-contrast and hook-backed so they can move between carriers. Text-only ID panels suit embroidery. PVC is the tougher choice if the patch will see rain, mud and frequent swaps. See custom PVC patches.

How much do custom police patches cost?

Embroidered police patches start at $0.75 a piece. Size is the average of height and width, so a 3.5 by 4.5 inch shoulder patch is priced as a 4 inch patch. Every backing is included.

Size50 pcs100 pcs300 pcs500 pcs1000 pcs
2 inch$2.95$1.85$1.10$0.95$0.75
2.5 inch$3.45$2.15$1.35$1.15$0.90
3 inch$3.95$2.55$1.60$1.35$1.05
3.5 inch$4.65$2.95$1.90$1.60$1.25
4 inch$5.35$3.45$2.25$1.90$1.55
4.5 inch$6.15$3.95$2.65$2.25$1.85
Embroidered face with hook and loop backing, per piece in USD. Loop panels included.

Patches larger than 4.5 inches, such as back panels, are quoted individually. 100% embroidery coverage adds 15%, as does metallic thread. The full grid is on patch pricing.

A note on authorisation

We make patches from the artwork you send. For an official department patch, the order should come from the department, or with its permission. We do not make insignia intended to let anyone pass as an officer. If a request looks like that, we will decline it.

How to order

  • Send the artwork, or a photo of the current patch with its size
  • Tell us the quantity, the backing and the border
  • We send a free digital proof, usually the same working day
  • You approve it and pay the 50% deposit. Production is 10–12 business days, or 5–7 on rush at no extra charge
  • Free tracked shipping, usually 3–7 business days in transit

Instant patch price calculator

Enter your size and quantity for an instant estimate from our price list. Your exact price is confirmed on the free proof.

Sew-on, iron-on and Velcro (hook) backings are the same price. Free proof, rush at no extra charge, free tracked shipping worldwide. Minimum 50 pieces per design.

Get my exact quote

What do you guarantee on every order?

These are the terms every order is made under — the same ones written in our order terms, not a sales promise.

  • Free proof, usually the same working day. It shows size, thread colours, border and backing.
  • Unlimited free changes. Ask for as many proof revisions as you need.
  • Nothing is made until you approve it in writing. You can cancel free of charge at any point before approval.
  • Remade at our cost if it does not match the proof. Tell us within 14 days of delivery with photos and we cover the remake and the return shipping on our errors.
  • No setup or digitizing fees. Redrawing and digitizing your artwork is part of the price.
  • Free tracked shipping worldwide.

Honest limits: thread is matched as closely as thread allows, so a small shift against a printed Pantone chip is normal, and very fine detail is flagged on the proof before you approve it.

Custom police and law enforcement patches

Custom police patches cover shoulder patches, department emblems, unit and SWAT insignia, and law enforcement morale patches. We make custom embroidered police patches with merrowed or laser-cut borders, in full-colour or subdued thread, and custom SWAT patches with hook backing for tactical gear.

For custom law enforcement morale patches, PVC is a popular alternative to embroidery because it handles rain and abrasion well. Embroidered police patches remain the standard for uniform shoulder emblems.

Custom embroidered police patches: what a shoulder patch has to do

A department shoulder patch is a working object before it is a design. It is read at a glance from several feet away, often in bad light, on a sleeve that is moving. It sits beside a body camera, a radio mic and a vest, and it goes through a laundry that no domestic machine resembles. Everything on this page follows from that.

The practical consequences: lettering no smaller than 5 mm, which on a 4 in patch means a department name and not a department name plus a motto plus a founding date; strong contrast between the device and the ground, because subtlety disappears at distance; and a merrowed edge, which resists fraying under abrasion far better than a hot-cut one.

Custom made police patches: sizes by placement

PlacementSizeBacking50 pcs / 1,000 pcs
Shoulder, both sleeves4 to 4.5 in tallSew-on$5.35 / $1.55 at 4 in
Breast or badge-tab patch3 inSew-on$3.95 / $1.05
Vest or carrier panel3 × 2 inHook$3.45 / $0.90
Carrier back panelUp to 6 × 3 inHookQuoted above 4.5 in
Name or callsign strip3 × 1 inHook$2.95 / $0.75

Order by sleeve, not by officer. Two patches per long-sleeve shirt, several shirts per officer, plus a margin for new hires — most departments end up at four to six patches per member and are glad of the spares.

Police embroidered patch: duty wear against gear

The backing decision splits cleanly along one line: anything laundered gets sewn, anything on gear gets hook.

  • Shirt sleeves and uniform shirts: sew-on. Commercial laundering destroys heat-seal adhesive, and a lifting patch on a duty shirt looks exactly as bad as it sounds.
  • Vests, carriers and bags: hook. It comes off for the shift that calls for a clean look, and goes back on for the one that does not.
  • Jackets: either. Sewn if the jacket is issued to one officer, hook if it is shared.

Hook backing costs nothing extra here, so the choice is purely about use. Which half goes where, and who supplies the loop field, is set out on what a Velcro patch is.

Subdued and low-visibility patches

Subdued does not mean black with white letters — that is high contrast on a dark ground. A properly subdued patch keeps thread within two shades of the garment: black on black, grey on grey, coyote on coyote. It reads close up and vanishes at distance, which is the entire point. Tell us the base colour of the shirt or carrier and we will set the palette against it rather than guessing from a screen.

Reflective and glow threads both carry a 15% surcharge. Glow is a novelty — about twenty minutes of visible charge. Reflective has genuine uses on a jacket but changes how the design reads under a torch, so proof it with that in mind.

K9, SWAT and specialist unit patches

Unit patches are ordered in smaller numbers than department insignia and are usually hook-backed for carriers rather than sewn to shirts. The design problem is always the same: too much in too little space. A 3 in unit patch supports one dominant shape, two colours plus the ground, and text at 5 mm or above. The teams whose patches look best are invariably the ones who cut something out.

Morale and shift patches — the unofficial side of the same wardrobe — have their own page: custom law enforcement morale patches.

Custom police patches for a vest

Vest and carrier patches are a different order from shoulder insignia: smaller, hook-backed, and often needed in a handful of variants — an identifier panel, a rank strip, a blood type, a callsign. It is worth ordering them together so the thread colours match across the set, and worth remembering that fifty patches with fifty different callsigns is a single design and prices as one 50-piece order.

Gold and metallic thread on law enforcement insignia

Metallic gold and silver suit police insignia and add 15%, because the thread runs slower and breaks more. The honest caution is abrasion: on a sleeve that rubs a vest all shift, metallic dulls faster than polyester. For dress and presentation patches, use it. For working shirts, an antique-gold polyester reads as metal at arm’s length and survives the laundry better.

More common questions

How much do custom police patches cost?

A 4 in shoulder patch is $5.35 each at 50 pieces, $3.45 at 100 and $1.55 at 1,000. Metallic thread adds 15%.

Can you reproduce our existing shoulder patch exactly?

Yes, for your own department. Send one patch or a flat daylight photograph with a ruler beside it, and say whether you want it faithful to the original or redrawn clean.

Will you make a patch for another agency’s insignia?

No. Official department insignia is ordered by that department. Misuse of police insignia is a serious matter in most states and we will not be part of it.

Do you make subdued law enforcement patches?

Yes — tell us the garment colour and we match the palette against it rather than defaulting to black.

What is the minimum order?

Fifty per design. For a specialist unit smaller than that, order 50 and keep the balance for new members, which is what most units do.

Common questions

What is the minimum order for custom police patches?

50 pieces per design. Small departments often order 100 so they have spares for new hires.

Can you copy our current shoulder patch?

Yes. Send a sharp photo and the size. We redraw it and you approve the proof before we make anything.

Which backing is best for a duty uniform?

Sew-on for the shoulder of a uniform shirt or jacket. Hook backing for vests and carriers, so the patch can move between them.

Can you add gold or silver thread?

Yes. Metallic thread adds 15% to the price. It looks good on seals and borders but is less crisp on very small text.

Do you make K9 and SWAT patches?

Yes. Unit patches are made exactly like shoulder patches, and many are ordered as hook-backed morale patches too.

Do you make subdued law enforcement patches?

Yes. We can produce subdued colourways in black, grey, olive or tan alongside the full-colour version.

Can police patches have a velcro backing?

Yes. Hook backing is common for tactical and SWAT patches; sew-on is standard for uniform shirts.

Get a free quote

Send us your artwork, size and quantity for custom police patches and we will come back with a price and a free digital proof. Nothing goes into production until you approve the proof, and shipping is free worldwide.

Get a free quote

Related reading