Custom Velcro Name Patches

A name patch on hook backing solves a problem sewn name patches cannot: the name changes, or the shirt goes to an industrial laundry, or one person wears four different garments. The patch takes the hook half, the garment takes a sewn loop panel, and the name moves in two seconds.

Patch backings compared: iron-on, sew-on and Velcro hook
PriceFrom $0.75 per piece
Minimum order50 pieces per design
Production10–12 business days standard; 5–7 rush, no extra charge
ShippingFree, tracked, worldwide — usually 3–7 business days in transit
ProofFree digital proof; nothing is made until you approve it
Payment50% deposit on proof approval, 50% before dispatch

Velcro name patch sizes

Name patches are priced by their longest edge against the standard grid, so a 5 × 1 in tape prices as a 3 in patch rather than as something exotic.

SizeFitsTypical use50 pcs / 1,000 pcs
3 × 1 inAbout 12 charactersFirst name, callsign, blood type$2.95 / $0.75
4 × 1 inAbout 16 charactersSurname, or name and initial$3.45 / $0.90
5 × 1 inAbout 20 charactersMilitary-format name tape$3.95 / $1.05
4 × 1.5 inTwo short linesName over role$4.65 / $1.25
3 × 2 inTwo or three linesName over company, with a small mark$3.45 / $0.90

Character counts assume capitals in a medium-weight sans serif. A condensed face fits two or three more; a script fits fewer and is slower to read, which defeats the point.

Letter height is the one hard limit

Embroidered lettering needs about 5 mm of cap height to stay legible after laundering. Under that, stitches merge and a lowercase “e” closes into a blob. On a 1 in tall tape, 5 mm gives you a comfortable single line with margin above and below. If you need two lines inside 1 in, the patch has to be woven instead — woven holds type down to roughly 2 mm. The military standard most people are copying uses 3/4 in high block capitals on a 5 in tape, which is generous and reads at distance.

Custom velcro name patches for uniforms

Four patterns cover nearly every uniform programme we supply.

  • One name per person, hook-backed, loop panel sewn to each shirt. The standard. The patch survives shirt replacement; the shirt survives staff changes.
  • Name plus a separate role or rank strip. Two small patches, two loop panels, so a promotion needs one new strip rather than a new name patch.
  • Name tape plus a unit or company patch. Different sizes, same hook backing, often ordered together to keep the thread colours identical.
  • Pool patches with no names. A role only — “SECURITY”, “MEDIC”, “STAFF” — swapped between whoever is on shift.

The military-format version, with the service tape and placement conventions, is on custom name tapes. For the full picture on backings against sewn alternatives, custom name patches compares them.

Velcro name tags for uniforms: the loop panel

If the garment already has a loop field — most tactical shirts, flight suits and plate carriers do — you need the patch only. If it does not, order the loop with the patches and have it sewn on. Two things that matter:

  • Cut the loop about 6 mm larger per side than the patch, so no hook edge overhangs and catches.
  • Sew the loop, never glue or iron it. Adhesive loop lifts at the corners within weeks on a garment that is worn and washed. We supply loop cut to size on request.

Step by step on the sewing: sewing a Velcro panel onto a garment.

A different name on every patch, at no extra charge

This is the part most people do not expect. Fifty patches with fifty different names is one design as far as the machine is concerned — the layout is fixed and the text field changes. So it prices at the ordinary 50-piece rate, with no per-name charge and no new set-up.

Send the names in a spreadsheet, one per row, spelled and capitalised exactly as you want them stitched. Check it twice: a stitched typo cannot be unpicked, and the proof we send back shows the layout, not all fifty names.

Washing and service life

Take the patch off before the garment goes in the machine. Left attached, the hook collects lint and fibre and loses grip over a handful of cycles — recoverable with a stiff brush, but avoidable. The loop panel sewn to the shirt washes without issue; press it closed against a spare hook square if you want to keep it clean. Done this way, a hook-backed name patch outlasts several garments, which is the entire economic case for it.

Common questions

How much do custom Velcro name patches cost?

A 3 × 1 in tape is $2.95 each at 50 pieces and $0.75 at 1,000. A 5 × 1 in tape is $3.95 and $1.05. Hook backing is included, not an upgrade.

Can each patch have a different name?

Yes, free, provided the layout is identical on each.

Do the patches come with the loop side?

Hook is on the patch as standard. Loop is supplied on request, cut to size.

What is the minimum order?

Fifty per design — and fifty different names count as one design.

Embroidered or woven for a name tape?

Embroidered if the letters are 5 mm or taller, which they usually are. Woven if you need two lines on a 1 in tape or very small type.

Can the loop panel be ironed on instead of sewn?

It can be, and it will fail at the corners. On a uniform that gets worn and washed, sew it.

What do you guarantee on every order?

You see a digital proof before anything is stitched, and nothing goes into production until you approve it. Thread colours are matched to the proof, not approximated. If something arrives wrong because of us, tell us within 14 days of delivery and we remake it free. Shipping is free and tracked worldwide.

Get a free quote

Send the artwork, the size and the quantity — or just a photo of what you have in mind — and you will get a price and a digital proof back, both free. Email hello@sewwhatembroiderydesigns.com or message the WhatsApp number in the footer.